Tuesday, June 28, 2016

Shocking!


When I worked in a factory it was a shocking experience in more ways than one.

First of all I had never worked in a factory. Most of the jobs I have worked had a different atmosphere than a factory. I was not used to being totally dependent on the person before me to do a task the right way so that I could do my task the right way before I passed it on to the next person.

In my other jobs even if the person before had made a mistake (it happens) all I had to do was take a closer look and fix it. In a factory sometimes the mistake could go back several people before the problem was solved. And sometimes it was not a human problem. Parts defects might cause things to go wrong.

Second the factory I worked at actually made shocks! We built industrial shocks rather than the kind found in the suspension system of a car.

The shocks we made ranged in size from maybe ten feet long to about 3/4 of an inch long. There were all the sizes in between.

Shocks are used to cushion the sudden stops of rides at an amusement park. Or they might be used in machines doctors use to do micro-surgery. Some are used to lessen the recoil of military guns. We did all that and more.

Most of the very large shocks we made were made for amusement parks. A lot were shipped to Florida for example. And there is the second-oldest operating amusement park in the United States which is not too far from where our factory was. If you ever ride a "drop" ride like the Demon Drop chances are our shocks are what kept your head from exploding when you hit bottom.

We even made shocks that operated Batman's cape in the Dark Knight trilogy. A simple mechanism would cause the shocks to hold the cape open and stiff looking. Then a release would relax the cape so it draped as a cape should.

We had in-house engineers whose sole reason for being there was to invent shocks for new applications. Most never panned out but sometimes we had a new type of shock to build.

Most but not all shocks consist of an outer tube made of metal, a bladder inside to allow the flow and holding of a liquid (usually some sort of oil), a rod that is pressed and released, and ball bearings and washers. Sounds fairly basic, Doesn't it?

Each different type of shock has its own unique set of building instructions. They are stored in the computer system and should be pulled each time a particular shock is to be built. Most of the time they are built in multiples so machines and parts can be set only once.

Of course testing is necessary to detect faults. Each and every shock is water tested to make sure it is sealed properly. A leak will cause it to not work the way it should. Then the pressure of the shock with the fluid inside is tested to make sure it has the correct pressure.

If they fail someone needs to find out why. Many times the whole thing needs to be taken apart and all the components examined as well as the build.

I was still a trainee but I had been working there a while. The woman training me was a saint.

She never not once heaved a heavy sigh or rolled her eyes with disgust when I made a mistake or needed help. She was always so nice about stepping in to give me a hand.

In that department one person often built the shocks from start to finish. The runs were usually not more than 20 pieces.

She was building one kind of shock and had me working on another kind.

I was in the final testing phase. To test those shocks we put the rod against the edge of the metal build table and pushed. It should have no give.

These were pushing all the way in. I called my trainer and she tried to help me.

We tried refilling them with the oil. They failed.

We took one apart and rebuilt it. It failed.

We examined the parts. They looked to be fine.

We rebuilt again. It failed.

Finally she called our supervisor. He came over. If anybody could find the problem it was him.

He pushed on the rod and it went all the way in. He tried refilling it with oil. It failed. He took it apart and examined the parts and decreed that they were not the problem. He rebuilt the shok. It failed.

The three of us spent almost a day and a half trying to find the problem.

Then the supervisor asked about the number of washers in it. I showed him that the build instructions called for one. Except that it said two were needed. That second washer cost us a day and a half of time and product.

Who would think that a little bitty washer or a bearing makes such a difference. Each one had to be built exactly according to specifications. There is a reason for instructions.

So we took them all apart and rebuilt them with two washers. We filled them with oil. We tested them and the rods all pushed back! Success.

There is one thing to remember... if the shocks do not work properly Batman could fall and break his neck!

12 comments:

  1. Fascinating, Emma. I never considered how important the attention to detail is in a factory. Great story!

    ReplyDelete
    Replies
    1. Thank you. I did not understand the importance of parts placement until I worked in a factory.

      Delete
  2. How interesting! And how frustrated you must have felt when it came down to that extra washer! So much connected and all dependent on all pieces working together. We should learn from that!

    ReplyDelete
    Replies
    1. I apologized for days about that washer. The importance may have been lost on some however. We were building shocks that were being tested for use in microsurgery. One of the younger women looked up and exclaimed, "I would never allow microsurgery on me using parts I made!" Scary, isn't it?

      Delete
  3. If this job was therapeutic, you would have had shock therapy.i lasted 3 weeks at the one time I tried.
    Come on down anytime to see a little of my world.

    ReplyDelete
    Replies
    1. I am not well-suited to factory work. I was happiest when I was put into the job of lasering the outer tubes. The laser put the company name, the part number, and the part size on the part. No one including bosses were allowed in the room with me unless I let them in. The rule was made to protect eyes from damage from the laser. I had special glasses for the job. I was alone for 8 hours. I loved that job.

      Delete
  4. I did factory work for a while but I was a mechanic that worked on the machinery. I can tell you, your team is one that a business owner would love. Doing root cause analysts is a profession practiced by few but it is an essential skill.
    R

    ReplyDelete
    Replies
    1. I am not a mechanical person. But I paid a lot of attention to the machines that I used. I knew what they were supposed to do and how they were supposed to sound. When I heard something "off" I immediately called the engineering department. (They did not like being called mechanics.) They appreciated that I did not wait until the machine broke down.

      Delete
  5. I can see how important it is.

    ReplyDelete
    Replies
    1. Each and every job is important. To do the job right and in a timely manner is more vital than we realize until we stop to think about it. Unless we find a better more efficient way to perform our tasks and have them approved we need to do things the right way. There is a reason.

      Delete
  6. Every time I read a post about one or another of you or your family's work experiences, Emma, I am so amazed and impressed by the wide variety. How distressing to find that a single washer was the cause of this problem, but good to know it was resolved.

    ReplyDelete
    Replies
    1. I have not even scratched the surface of the different jobs we have held. I am not even certain I can remember all of them.

      Delete